Please choose your region:
Aim EC pre-seed herbicide reduces weed competition controlling a number of troublesome weeds including glyphosate tolerant varieties. Producers get a quicker burn down with the addition of Aim EC with the flexibility of seeding immediately after application, including canola and lentils.
Chemical Group: Group 14. Registered and Supported Tank Mixes: 2, 4-D, bromoxynil, glyphosate, MCPA. Timing: Preseed. Used as harvest aid. Application Information: Rates and Packaging:
|1.2 L jugs c 8 jugs/case 2 L jugs x 4 jugs/case 4.8 L jugs x 4 jugs /case||15 mL/ac|
Surfactant: None required when tank mixing with glyphosate. Water Volume: 10 US gal/ac (100 L/Ha). Rainfastness: Aim® EC Herbicide is rapidly absorbed through the foliage of plants. To avoid significant crop response, applications should not be made within 6 to 8 hours of either rain, irrigation or when heavy dew is present on the crop. Mixing Instructions: It is important that spray equipment is clean and free of existing pesticide deposits before using this product. Follow the spray tank clean-out procedures specified on the label of the product previously applied, before adding Aim® EC herbicide to the spray tank. For best results, fill the spray tank with one half the volume of clean water needed for the area to be treated. Make sure the agitation system is operating while adding products. Slowly add the required amount of Aim® EC herbicide to the spray tank. Carefully rinse the container, adding the rinsings to the spray tank. Complete filling the spray tank to the desired level. Spray tank agitation should be sufficient to ensure uniform spray mixture during application and must continue until the spray tank has been emptied. Tank Mixtures: Fill spray tank one-half to two-thirds full with water. With agitator operating add the recommended amount of ingredients using the WAMLEGS order:
Wettable powders, dispersible granules, soluble granules (WG, DF, SG, WP, SP)
Agitate tank mix thoroughly
Micro-encapsulated suspensions (ME)
Liquid flowables and suspensions (SC, SL, SN, Li, SU, SE)
Emulsifiable concentrate formulations (EC)
Fill spray tank nearly full with water
Complete filling the spray tank to the desired level
If sprayer has been stored or idle, purge the spray boom and nozzles with clean water before charging sprayer with products to be applied. Avoid overnight storage of Aim® EC herbicide spray mixtures. Premixing Aim® EC herbicide spray solutions in nurse tanks is not recommended. Maintain continuous and adequate spray solution agitation until all the spray solution has been used. Do not use with tank additives that alter the pH of the spray solution.